Alpinestars(A星)Supertech M10 Lee Design摩托越野头盔
S-M10的设计符合Alpinestars(A星)的理念，与产品组合中的其他产品共享独特的主题；一个光滑、有吸引力的轮廓，它是流线型的，没有任何外部通道和特征，这些通道和特征可能会在碰撞中充当负载点，或损害结构的整体完整性。表面曲率有助于减少碰撞时的摩擦，允许偏转和最有效的能量传递，以保护骑车人的头部不受直接力作用于头骨以及颈部和脊柱。孔的设计可容纳各种护目镜，外壳中的通风口的位置可最大限度地提高通风效率。
特征：
- S-M10外壳的外形以性能为重，其设计风格将头盔的外形及其雕刻表面识别为独特的“Alpinestars(a星)”。
- 另一个关键特征是S-M10外壳尺寸解决方案；每种头盔尺寸都有自己合适的外壳尺寸，以提供最符合人体解剖学的解决方案，满足全球范围内的各种贴合需求。
- 头盔的外壳结构采用了高度先进的成型技术和多种复合材料组合。
- 3K碳，高密度碳外层，提高外壳的强度和能量耗散效率。
- 单向碳复合材料层，在壳体周围提供明显更大的径向强度，防止压缩，但允许控制偏转，以减少传递的冲击能量。
- 芳纶纤维层，提供关键渗透保护。
- 这种层的组合通过环氧树脂粘结获得了更高的性能，从而提供了最佳的强度和能量管理；有限的外壳偏转意味着能量传播得更广，并更好地被EPS内衬吸收。
- S-M10结构中采用的独特的壳体叠层工艺的结果是非常有效的冲击保护。凭借装备齐全的头盔测试设施，在Alpinestars(a星)赛车发展中心内，一项详尽的冲击研究计划已使Supertech M10返回线性和斜向冲击性能，大大提高了当前头盔法规标准限制。对于直接、线性、平均幅度为41%的冲击，对于旋转加速度、倾斜、平均冲击性能为48%。
Alpinestars Supertech M10 Lee Design Motocross Helmet
The S-M10’s design is coherent to Alpinestars philosophy and shares distinctive themes with other products in the portfolio; a smooth, attractive, profile which is streamlined and free of any external channels and features that might act as a load point in an impact, or compromise the overall integrity of the construction. The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column. The aperture is designed to accommodate a wide variety of goggles and the air vents in the shell are located to maximize ventilation efficiency.
Features:
- The S-M10 shell has been profiled with performance as a priority and with a design style that identifies the profile of the helmet and its sculpted surface as uniquely ‘Alpinestars’.
- Another key feature is the S-M10 shell sizing solution; each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs worldwide.
- The helmet’s shell construction utilizes a highly advanced molding technology with a multi-composite combination.
- 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell.
- Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy.
- Aramid fiber layer which provides critical penetration protection.
- This combination of layers is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the EPS liner.
- The result of the unique shell lay-up process employed in the S-M10 construction results in extremely effective impact protection. With a fully equipped helmet testing facility, within Alpinestars Racing Development Center, an exhaustive impact research program has resulted in the Supertech M10 returning linear and oblique impact performance which far improves upon current helmet regulation standard limits. For direct, linear, impact by an average magnitude of 41% and for rotational acceleration, oblique, impact performance by an average of 48%.
